BasixClean™ powerful alkaline detergent

High alkalinity to remove fat and built with chlorine to break down protein residues

Good complexing capacity to address minerals

For alkaline dominant in soft water or alternate cleaning in all water conditions

BasixClean, a formulation successfully used for many years and tested for compatibility with DeLaval equipment, is a chlorinated alkaline that removes milk fat and protein in order to keep your milking and cooling equipment as clean as possible. An effective cleaning routine will contribute to a premium milk quality and reduce the risk of bacteria growth in the milking installation.

Additional information

Liquid chlorinated alkaline detergent for milking and cooling equipment built with high alkalinity to remove fat. Alternate with a DeLaval acid detergent, frequency depending on water hardness. For advice, contact the DeLaval service technician in your area.

Dosage recommendation	Dose at 0,5 dl / 10 L of water. Alternate with a DeLaval acid detergent from once a week to every other cleaning depending on water hardness. Consider use of a DeLaval Biocidal CIP solution if needed.
User instructions	After milking, empty the installation of all residual milk traces. Rinse with warm water (40-45°C). Dose BasixClean in hot water (60-85°C). Circulate solution 7-10 minutes. Always keep water temperature above 40°C. Check cluster and water flow, run solution to waste after cleaning. Rinse the installation with potable cold water. Let the installation dry.
Storage conditions	Store frost-free. If frozen, thaw product at room temperature and shake to restore composition. Keep away from direct sunlight and high temperatures. Keep out of reach of children.
Appearance	Clear, slightly yellow, liquid
Relative density (20°C)	1.163 g/ml ± 0.01
Basic composition	Sodium hypochlorite, Sodium hydroxide
pH (1% solution)	11.80 ± 0.5
Shelf life	1 year from production date (indicated on can)